Results 1 to 6 of 6

Thread: 2001 Pro Modlite and I'm cleaning out my garage!!!

  1. #1
    Junior Member
    Join Date
    Sep 2010
    Location
    Bettendorf Iowa
    Posts
    9

    2001 Pro Modlite and I'm cleaning out my garage!!!

    For sale is a 2001 Pro Modlite. I bought the frame and some body parts in 2008 and never raced it. I'm asking $3,000 OBO for the car as it sits.

    It currently has the following installed
    2001 Pro with Modlite body in white (with a few extra panels)
    New never raced Peter D front spindles for a Pro
    New never raced Peter D aluminum front hubs and scalloped rotors
    New never raced Peter D rear top hat scalloped rotors
    New never raced toyota 10 bolt rear end (built by me)
    New never raced hawk adapters
    New never raced wilwood calipers and brake pads all around
    New never raced Hawk 3rd link
    New never raced fuel cell
    Used Pro Shocks all around
    Used seat (belts are expired)
    Used RR beadlock, RF battle bead and 2 chrome LHS rims with older Hoosiers on them

    *** Spare parts for sale ***
    I am also cleaning out my garage and have the following for sale. no reasonable offer will be refused
    10 bolt gear sets (I'll have to check ratios)
    10 bolt spare long axles
    1 10 bolt spool
    1 Pro rear end housing w/ welded brackets
    1 center section and bearings to make another rear end. I also have the tubing for the rearend
    1 axle fixture with center section for welding
    1 tubing bender
    extra shocks & springs
    extra rims and tires
    heims in 3/4", 5/8" and 1/2"
    1981 KZ750 re-built and never fired. Was from an old car I bought. It is currently mounted in the car. i also have the harness for it.
    If you don't see something ask I might just have it.

    This car needs a couple solid days of work and you can be racing. There are plenty of parts to keep you going as well. I will sell everything listed for $4,500 OBO. Bring your truck and trailer and clean out my garage!

    I'm located in Iowa, 52722.

    Thanks
    Todd
    email tnt_motorsports@yahoo.com

    Click image for larger version. 

Name:	image1.jpg 
Views:	1432 
Size:	96.2 KB 
ID:	15328Click image for larger version. 

Name:	image2.jpg 
Views:	868 
Size:	96.3 KB 
ID:	15329Click image for larger version. 

Name:	image3.jpg 
Views:	806 
Size:	94.7 KB 
ID:	15330Click image for larger version. 

Name:	image4.jpg 
Views:	959 
Size:	95.2 KB 
ID:	15331
    Last edited by Todd; 06-21-2017 at 07:08 PM.

  2. #2
    Junior Member
    Join Date
    Jul 2015
    Posts
    11

    Re: 2001 Pro Modlite and I'm cleaning out my garage!!!

    I'm interested in tubing bender . What brand and what size dies you have with it.

  3. #3
    Junior Member
    Join Date
    Sep 2010
    Location
    Bettendorf Iowa
    Posts
    9

    Re: 2001 Pro Modlite and I'm cleaning out my garage!!!

    I emailed you specifics on the tube bender.

    Todd

    Quote Originally Posted by Shawnsr View Post
    I'm interested in tubing bender . What brand and what size dies you have with it.

  4. #4
    Junior Member
    Join Date
    Sep 2010
    Location
    Bettendorf Iowa
    Posts
    9

    Re: 2001 Pro Modlite and I'm cleaning out my garage!!!

    I have the following parts for sale that I am willing to sell as well... tnt_motorsports@yahoo.com

    Item Description Qty Cost Total
    1 new coil over kits 4 $40.00 $160.00
    2 new 1/2" wheel spacers 3 $15.00 $45.00
    3 new 1/4" wheel spacers 3 $12.00 $36.00
    4 new 10 bolt toyota full spool 1 $100.00 $100.00
    5 used 130, 140, 185, 190, 200 # springs 5 $30.00 $150.00
    6 used SB63 Pro Shock 2 $40.00 $80.00
    7 used SB64 Pro Shock 1 $40.00 $40.00
    8 used rear end housing fixture 1 $150.00 $150.00
    9 used parts to make rear end housing 1 $50.00 $50.00
    10 used Pro rear end housing 1 $150.00 $150.00
    11 used3.58 toyota 10 bolt welded gear 1 $200.00 $200.00
    12 used 3.73 toyota 10 bolt welded gear 1 $200.00 $200.00
    Sold 13 used 3.90 toyota 10 bolt welded gear 1 $200.00 $200.00 Sold
    14 used 4.10 toyota 10 bolt welded gear 1 $200.00 $200.00
    15 new pro steering shaft assembly 1 $175.00 $175.00
    16 new chassis tabs 1.75" w/ 1/2" hole (Speedway 910-07220) 5 $1.00 $5.00
    17 new roll bar gussets (Speedway 910-73055) 20 $0.25 $5.00
    18 new 1" pinch clamps 2 $23.00 $46.00
    19 new 1" pinch clamps for rod end 3 $20.00 $60.00
    20 new -3 to 3/16 IFF break line adapters 5 $10.00 $50.00
    21 new -3 to 1/8 pipe thread break line adapters 6 $3.00 $18.00
    22 new 3/4" heim joints RH thread 6 $10.00 $60.00
    23 new 3/4" RH thread jam nuts 16 $2.00 $32.00
    24 new 1/2" heim joints RH thread 10 $6.00 $60.00
    25 new 1/2" RH thread jam nuts 21 $1.00 $21.00
    26 new 1/2" heim joints LH thread w/ jam nuts 2 $7.00 $14.00
    27 used Beadlock rim with 235 hoosier 1 $40.00 $40.00
    28 used Battle bead rim with 215 hoosier 1 $30.00 $30.00
    29 used Chrome rim with 215 hoosier 1 $20.00 $20.00
    30 used spare rims 5 $20.00 $100.00
    31 tube bender 1 $200.00 $200.00
    Last edited by Todd; 03-23-2017 at 10:08 AM.

  5. #5
    Junior Member
    Join Date
    Sep 2010
    Location
    Bettendorf Iowa
    Posts
    9

    Re: 2001 Pro Modlite and I'm cleaning out my garage!!!

    The car and parts are still for sale. I am interested in listen to reasonable offers and willing to assist with delivery.

    Thanks
    Todd

  6. #6
    Junior Member
    Join Date
    Sep 2010
    Location
    Bettendorf Iowa
    Posts
    9

    Re: 2001 Pro Modlite and I'm cleaning out my garage!!!

    Everything has been sold, thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •